If it is a conventional motor malfunction, it can be solved by making appropriate adjustments based on the specific cause, and everyone should also have a grasp of this knowledge. Therefore, the editor has specifically summarized it for your reference.
There are many reasons analyzed after the motor malfunctions, such as incorrect internal parameter settings; Frequency modulation instrument program disorder; Damage to the frequency converter or excessive dust on internal components, etc. At the beginning of elimination, cleaning should be carried out first, then restarting and adjusting the parameters to the most appropriate position.
The above are the reasons and solutions for motor loss of control. In addition, there are also faults in the motor speed sensor, which may be caused by the motor speed sensor not sensing the power signal. So once it happens, first check the system to see if the sensor is too dirty or the distance from the sensing pawl is too large or damaged. If so, just clean, adjust, and replace it specifically.
